Suppliers with verified business licenses
Audited Supplier
Auto Feeding Dosing Mixing System For SPC/LVT/WPC Floor Extrusion Line
Application and introduction
This system is mainly used for the conveyance of power materials.It can be adopted in the negative pressure and positive pressure(thin phase and thick phase),the dosing of main materials and auxiliary materials,the mixer and the collecting storage.And according to the site situation,it can be adopted the negative pressure or screw conveyance to distribute materials into each hopper.During the whole period,the PLC central control will be adopted and the central monitor on the post as well.
The system will meet the needs of the production art demand and the present condition of the plant house.The annual output is 2000T-100000T.
Characteristic of this system
1.Maximum capacity and efficiency
2.Saving from time
3.Save handwork
4.Additives used in each product provides the same rate and ensures the continuity of product quality.
5.Reduce waste
Automatic Mixing Feeding System Advantage:
1.Automatic feeding system -unmanned
SPC PVC automatic mixing solution is professionally designed for PVC or WPC plastic industry in mixing workplace.This set of confined system is used for automatically measuring,feeding,mixing,dosing to the extrusion of variety powders,particles and liquids.It leads to labor-saving,and prevent from directly touching with powder.
2.Central dust collecting system-dust-free
The mixing workplace of PVC and WPC plastic industry is mass dust and workers are mobile.In the use of centralized feeding system we choose to connect the dust collection with the dust occurring outlet,so that collecting and recycling use of this part.Dust-free workshop is not only the modern industrial standard but also can save a lot of material and labor.
3.The central control system-intelligentize
Intelligent control system is to avoid mistakes and loss caused by manual operation,such as the wrong formula of feeding raw material lead to batches unqualified products and wast of secondary processing.The lack of automatic dosing function would result in short filling,which is the damage to screw and extruder.The key point is that lack of an automatic system to calculate materials based on production
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}