More than 30 years experince guarantees the good quality and excellent services.
Uses and Features
1. It is used in mixing, drying, colouring and other processing. It is the most ideal equipment for producing shaped plastic material and plastics pipes.
2. The technology of the mainshaft sealed apparatus has got the state patent with No. ZLP62430641 and it has two functions of electric and steam heating.
3. Two layers of sealing technology is adopted in the pot cover. The opening of the heating mixed cover adopted the airopening device and the opening of the cooling mixed cover adopted hydraulic pressure control system.
4. The electric control section with the programmable logic control adopted well-known imported meters and control components.
5. It could be equipped with the dust removing device.
6. The blades have been passed the test of the dynamic and static balance testing machine.
6. Manual feeding, vaccum feeding or screw feeding is available.
1,Name :High-speed mixer
2,Quantity :1set
3,Model:SHR-800A
1)Mixing tank
A,Total volume :800L,Effective volume:600L,feeding quantity one time:≤220-260kg
B,Shape:round pallet
C,Inner barrel material:SUS304,δ=10mm,200#polishing processed ,
D,Outside barrel material:Q235-A,δ=10mm,
E,Barrel top flange material:SUS304,δ=25mm,200# polishing processed
F,Bottom board material :Q235-A,δ=20mm,
2) Mixing Blades
A,Material:SUS304,200#polishing processed
B. Rotary Speed: 370/740rpm
C,Construction of Blades:Upper blade, middle blade and bottom blade.
3)Barrel cover and fluctuation parts
A,Barrel cover material:ZL102,inner surface 200#polishing processed
B,Lift control:There is pneumatic device to lift the barrel cover, then move the cover levelly, the cover is open.
C,Sealing :The sealing part adopts two white lines silicon rubber for sealing.
D,At the barrel cover there is a main feeding mouth, assistant feeding mouth and vent .
4)Bottom Base
A,Construction:To equip mixing tank and motor,and equipped belt tighten device.
B,Material:Q235-A δ=25mm
C. Barrel Base Material: HT200
D. Machine Frame Material: Q235-A
5)Material discharge device
A,Material:made of ZL102,200# polishing processed
B,Construction:Can be equipped with discharge cylinder. There is observing hole, air hole, valve opening spacing and so on.
C. Discharge Valve: SUS304
6)Motor
A,Motor power:110KW Frequency Control ABB Inverter
B. Rotary Speed: 740/1480rpm
7)Axes sealing parts
A,Oil sealing +labyrinth sealing circle
B,Oil sealing is nature rubber
C,The air pushed from labyrinth sealing circle to stirring tank, this type of design prevents the product goes into axes sealing parts.
D,It adopts NSK bearing
8)Safety device
A,There is a contact point switch insure that the mixing blades can only rotate after the barrel Cover is closed..
C.Main shaft:sus304, 200 # polishing processed
Barrel cover
A. Made of cast aluminum
C. Sealing:Adopt natural rubber for sealing
Bottom
A. Material:Q235-A
B. Construction:Can fix barrel
Discharging
A. Made of cast aluminum
B. Construction:Can be equipped with discharge cylinder. There is observing hole, air hole.
Motor
A. Power:15kw
Seal of shaft
A. oil+maze-style seal
B. Made of natural rubber
C. The air goes into the barrel via the maze-style seal, which prevents the powder going into the seal
Control Syste
The best high speed mixer from China. Don't hesitate to contact us!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}